Despite the corner pictured here being a perfect place for placing tools and various construc- tion materials, this place also has to be modeled. So using the same procedure used to build the hill next to PT, foam walls were cut to size and given a certain shape on their top side, then masking tape was used in order to create a web strong enough to support the first layer of plaster cloth (Woodland Scenics C1203). After soaking and applying 2 coats of plaster cloth 2 small rocks were glued to the terrain using hydrocal (Woodland Scenics C1201) - this was chosen because of convenience - getting to the classic but more heavy plaster was just a few meters farther away. Foam walls are not used on every possible side, since I still need access to various wires and access holes. Enlarging the second photo, you'll spot a paper cylinder protecting the thing inside from the latex paint that's about to be applied. What's there ? A Viessmann animated figure; more details will be unveiled as the corner comes closer to completion.
Niciun comentariu:
Trimiteți un comentariu